COFloorsColorado Floors·Floors that hold up at altitude.
Refinished hardwood flooring in a sunlit empty Colorado room
Fort Collins · Larimer County

Hardwood Floor Refinishing in Fort Collins, Colorado

What it costs, and what Fort Collins's housing stock does to the job.

Floor refinishing in a 1992-median city

The median Fort Collins home was built in 1992 and 4.6% of the city’s housing
predates 1940. For floor refinishing specifically, that is not background color — it is the thing that
decides the job.

There is a small historic core in each of these cities where refinishing is worth investigating, and a large modern majority where there is simply nothing underneath to find. The citywide median says very little about a specific block, so check the age of your own house before assuming either way.

Fort Collins is newer still — median 1992 — with a small but genuine historic core near Old Town. Outside that, this is modern construction where the subfloor is a known quantity and the decisions are about wear layer and very dry winter air.

What it costs in Fort Collins

Fort Collins / Longmont labor runs above the Colorado baseline, which is why the range below sits higher than the statewide $3–$8. Installed, materials and labor together:

Work Fort Collins range Colorado range
Refinishing existing boards $3 – $8 a square foot $3 – $8 a square foot

An estimate, not a quote. These are planning ranges for Colorado, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.

Extras are where a Fort Collins job most often moves away from the band: removing the old floor,
prepping a plank subfloor, and stairs. The
cost estimator prices those separately against your own
room.

Questions worth asking before you book

  • What is the subfloor, and what does it need? With 4.6% of Fort Collins homes predating 1940, plywood or OSB is the safe expectation anywhere outside the Old Town core.
    How to identify yours.
  • Is the old floor coming out or being covered? Covering costs less and is
    sometimes the safer answer — particularly over
    9×9 tile — but it costs you height at doors and
    at the bottom stair riser.
  • What is the cut-and-waste allowance? A century-old house is rarely square, and
    cuts are labor.
  • What is your PA Home Improvement Contractor number? It is legally required to
    be on the estimate. How to check it.

This domain and website are held by a private owner — ownership & partnership inquiries