COFloorsColorado Floors·Floors that hold up at altitude.
Refinished hardwood flooring in a sunlit empty Colorado room
Longmont · Boulder County

Hardwood Floor Refinishing in Longmont, Colorado

What it costs, and what Longmont's housing stock does to the job.

Floor refinishing in a 1991-median city

The median Longmont home was built in 1991 and 4.8% of the city’s housing
predates 1940. For floor refinishing specifically, that is not background color — it is the thing that
decides the job.

There is a small historic core in each of these cities where refinishing is worth investigating, and a large modern majority where there is simply nothing underneath to find. The citywide median says very little about a specific block, so check the age of your own house before assuming either way.

Longmont is Boulder County without Boulder pricing — median 1991, under 5% prewar. Modern construction across most of the city with a small older center. The practical difference from Boulder is labor cost rather than what the house will tolerate.

What it costs in Longmont

Fort Collins / Longmont labor runs above the Colorado baseline, which is why the range below sits higher than the statewide $3–$8. Installed, materials and labor together:

Work Longmont range Colorado range
Refinishing existing boards $3 – $8 a square foot $3 – $8 a square foot

An estimate, not a quote. These are planning ranges for Colorado, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.

Extras are where a Longmont job most often moves away from the band: removing the old floor,
prepping a plank subfloor, and stairs. The
cost estimator prices those separately against your own
room.

Questions worth asking before you book

  • What is the subfloor, and what does it need? With 4.8% of Longmont homes predating 1940, plywood or OSB is the safe expectation outside the small older core.
    How to identify yours.
  • Is the old floor coming out or being covered? Covering costs less and is
    sometimes the safer answer — particularly over
    9×9 tile — but it costs you height at doors and
    at the bottom stair riser.
  • What is the cut-and-waste allowance? A century-old house is rarely square, and
    cuts are labor.
  • What is your PA Home Improvement Contractor number? It is legally required to
    be on the estimate. How to check it.

This domain and website are held by a private owner — ownership & partnership inquiries