COFloorsColorado Floors·Floors that hold up at altitude.
Warm oak hardwood flooring in an empty Colorado room
Longmont · Boulder County

Hardwood Flooring Installation in Longmont, Colorado

What it costs, and what Longmont's housing stock does to the job.

Hardwood flooring in a 1991-median city

The median Longmont home was built in 1991 and 4.8% of the city’s housing
predates 1940. For hardwood flooring specifically, that is not background color — it is the thing that
decides the job.

A modern city rather than a suburb of one, and the housing reflects it: current subfloors, current framing, an open choice of material. What is different here is elevation — Colorado Springs sits meaningfully higher than Denver — so the acclimation and moisture-content discipline is if anything tighter, not looser. Ask any installer what they target.

Longmont is Boulder County without Boulder pricing — median 1991, under 5% prewar. Modern construction across most of the city with a small older center. The practical difference from Boulder is labor cost rather than what the house will tolerate.

What it costs in Longmont

Fort Collins / Longmont labor runs above the Colorado baseline, which is why the range below sits higher than the statewide $6–$21. Installed, materials and labor together:

Work Longmont range Colorado range
Hardwood, installed $6 – $21 a square foot $6 – $21 a square foot

An estimate, not a quote. These are planning ranges for Colorado, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.

Extras are where a Longmont job most often moves away from the band: removing the old floor,
prepping a plank subfloor, and stairs. The
cost estimator prices those separately against your own
room.

Questions worth asking before you book

  • What is the subfloor, and what does it need? With 4.8% of Longmont homes predating 1940, plywood or OSB is the safe expectation outside the small older core.
    How to identify yours.
  • Is the old floor coming out or being covered? Covering costs less and is
    sometimes the safer answer — particularly over
    9×9 tile — but it costs you height at doors and
    at the bottom stair riser.
  • What is the cut-and-waste allowance? A century-old house is rarely square, and
    cuts are labor.
  • What is your PA Home Improvement Contractor number? It is legally required to
    be on the estimate. How to check it.

This domain and website are held by a private owner — ownership & partnership inquiries